25 October 2011

On bail, in Fyshwick at 3am with a gun and a fistful of ice

| johnboy
Join the conversation
18

ACT Policing has arrested a 19-year-old Palmerston man after an incident in Fyshwick early this morning (Tuesday, October 25).

Around 3.30am, Woden Patrol members located an unlocked vehicle, with the keys in the ignition, parked in Ipswich Street, Fyshwick. Checks on the vehicle revealed that the registered owner may be in breach of his bail conditions.

About an hour later, the person of interest was seen walking along Wiluna Street, Fyshwick, toward the Shell service station and a foot pursuit began.

Police will allege that while the man was being pursued, he dropped a 9mm handgun and a bag containing a substance suspected to be methylamphetamine (ice).

The man was arrested and conveyed to the ACT Watch House. He will face the ACT Magistrates Court this morning to answer drug-related charges and a weapons charge.

[Courtesy ACT Policing]

Join the conversation

18
All Comments
  • All Comments
  • Website Comments
LatestOldest

neanderthalsis said :

Deref said :

Henry82 said :

Why would someone try and fix a deactivated gun?

Why would anyone want a deactivated gun?

Collectors, re-enactors, militaria enthusiasts, museums…

In a lot of parts of the world deactivated guns are much less restricted then “live” guns. This is much less the cast in most of Aust.

neanderthalsis12:08 pm 26 Oct 11

Deref said :

Henry82 said :

Why would someone try and fix a deactivated gun?

Why would anyone want a deactivated gun?

Collectors, re-enactors, militaria enthusiasts, museums…

Henry82 said :

Why would someone try and fix a deactivated gun?

Why would anyone want a deactivated gun?

neanderthalsis9:39 am 26 Oct 11

Diggety said :

neanderthalsis said :

p1 said :

AAMC said :

I’m going to guess it was an unregistered hand gun?

It might have been registered to the person he stole it from.

There is a fairly big market in re-birthing deactivated handguns. In most cases these “replicas” have welded barrels, firing pins removed, drilled actions etc. The re-birthing can be a very dodgy process and make the gat just as harmful to the firer as the person at the other end.

Do you have more info on that?

I have a deactivated pistol, I’ve been looking over it for ages and I there is just too much deactivation to reservice it in my opinion. They’re done a very good job making it unusable.

But to be frank, anyone who does attempt to reactivate those replicas deserves some back-fire in the face.

Replicas are actually prohibited in the ACT, see pg 192.

There has been much written locally and internationally about re-birthing:

NSW Parliamentary Library publication, Firearms Restrictions: Recent Developments

Gunpolicy.org, a UK site.

The National Coalition for gun control

The SSAA Shooter magazine did an article on it a while back and the Australian Institute of Criminology site has a number of papers and references to the practice.

Henry82 said :

farnarkler said :

Is there ever any penalty given to magistrates if someone they’ve let out on bail re-offends whilst out? I suspect not. Pity.

They get arrested, then re-released on bail again. So you could say the penalty is a free ride in a police car?

Don’t forget some free meals while they wait until they are released at their next bail hearing! 🙂

farnarkler said :

Is there ever any penalty given to magistrates if someone they’ve let out on bail re-offends whilst out? I suspect not. Pity.

They get arrested, then re-released on bail again. So you could say the penalty is a free ride in a police car?

Is there ever any penalty given to magistrates if someone they’ve let out on bail re-offends whilst out? I suspect not. Pity.

Henry82 said :

Why would someone try and fix a deactivated gun? Surely it would be easier just to build one from scratch. I’ve used bolt action rifles a number of times, and the mechanism is very simple.

anyway, well done to the police for catching the criminal.

The 9mm is a pretty high intensity load, somewhere around 30000 psi. Pressures in centrefire rifles get up around 60000 psi. That’s tens of tons per square inch developed and released over sub millisecond time spans. The materials used in firearms have to be pretty special to withstand these pressure spikes, and the manufacturing has to be spot on. If something goes awry, Bad Things Can Happen. Improvised firearms usually end in pieces, and it’s highly likely that the user will rest in pieces. Check out http://www.thegunzone.com/m1akb.html for an example, or just Google for “Handgun Kaboom” for lots of sobering pics.

As a responsible firearms owner, I hope they throw the book at this dog. He could’ve used that gun to kill any one of us in a half-arsed robbery attempt after hoovering some of that stupid powder up his nose. I’d give him a kicking if I could.

dpm said :

I wonder if they need to reconsider more seriously who they let out on bail. I think that is two people in two days that have been arrested for further criminal offenses whilst out on bail……

http://www.legislation.act.gov.au/a/1992-8/current/pdf/1992-8.pdf

Unfortunately while we can say that the Magistrates should lock more people up…. It is legislation that is holding them back…. Have a read of the bail act, posted above and see what the Magistrates have to deal with.

I wonder if they need to reconsider more seriously who they let out on bail. I think that is two people in two days that have been arrested for further criminal offenses whilst out on bail……

Why would someone try and fix a deactivated gun? Surely it would be easier just to build one from scratch. I’ve used bolt action rifles a number of times, and the mechanism is very simple.

anyway, well done to the police for catching the criminal.

neanderthalsis said :

p1 said :

AAMC said :

I’m going to guess it was an unregistered hand gun?

It might have been registered to the person he stole it from.

There is a fairly big market in re-birthing deactivated handguns. In most cases these “replicas” have welded barrels, firing pins removed, drilled actions etc. The re-birthing can be a very dodgy process and make the gat just as harmful to the firer as the person at the other end.

Do you have more info on that?

I have a deactivated pistol, I’ve been looking over it for ages and I there is just too much deactivation to reservice it in my opinion. They’re done a very good job making it unusable.

But to be frank, anyone who does attempt to reactivate those replicas deserves some back-fire in the face.

neanderthalsis2:27 pm 25 Oct 11

p1 said :

AAMC said :

I’m going to guess it was an unregistered hand gun?

It might have been registered to the person he stole it from.

There is a fairly big market in re-birthing deactivated handguns. In most cases these “replicas” have welded barrels, firing pins removed, drilled actions etc. The re-birthing can be a very dodgy process and make the gat just as harmful to the firer as the person at the other end.

AAMC said :

I’m going to guess it was an unregistered hand gun?

It might have been registered to the person he stole it from.

I’m going to guess it was an unregistered hand gun?

Mysteryman said :

MrMagoo said :

Not the sharpest tool in the shed. Good work boys, another clown with a gun off our streets.

Too bad the judiciary won’t keep him off the street.

To true, unfortunately.

MrMagoo said :

Not the sharpest tool in the shed. Good work boys, another clown with a gun off our streets.

Too bad the judiciary won’t keep him off the street.

Not the sharpest tool in the shed. Good work boys, another clown with a gun off our streets.

Daily Digest

Want the best Canberra news delivered daily? Every day we package the most popular Riotact stories and send them straight to your inbox. Sign-up now for trusted local news that will never be behind a paywall.

By submitting your email address you are agreeing to Region Group's terms and conditions and privacy policy.